How To Determine the Correct Size Lug Nuts For a Trailer  

Trailer wheel lug nuts that are 1/2-inch inside diameter typically have a 20-TPI thread pitch (20 threads per inch). Most lug nuts also use a 60-degree-coned profile like #CE11051, but a 90-degree like #STN569 is also available for 9/16-inch studs.…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Hey Jim! The Taskmaster and Westlake tires, like the Taskmaster ST235/75R15 Off-Road #TA45RR and Westlake ST235/75R15 Off-Road #WST54FR you were looking at, are made in China. A lot of people tend to shy away from trailer tires made in China but…

In this case, the size of the wheel stud it fits and the size of the nut are interchangeable for size; the Lionshead Trailer Wheel Swivel Flange Lug Nut #LI84FR is a 5/8"-18 nut.

So the install of a spindle like the #TRU97FR really needs to be done by a welder who has done the job before and has the special jigs for the job. It's a precision job and we can't recommend a method for it aside from taking…

Since most trailer manufacturers do not make wheel and tire information available to the general public, it is hard for me to tell you what size lug nuts you have on the wheel. I can tell you they do have caps over them. The most common size of lug…

The recommended space between tires on a tandem or triple axle trailer is around 4". If you were to replace ST205/75R15 tires with ST235/75R15 like the Taskmaster Radial Off-Road Trailer Tire part #TA45RR then you'd lose…

At this time the Solera Smart Arm RV Awning Conversion kit part #LC759405 does come with end caps that attach to the awning roller. At one point it was left off like the review you mentioned but now they are for sure there.

All of the TPMS sensors we carry are closed systems so they wouldn't be compatible with the GM sensors you have, you would need to get these from GM directly. I also can't speak to the fitment of GM's sensors with…

I do have an option for you but the GM TPMS uses a proprietary software, you cannot use another sensor with the program even if they operate on the same frequency per TST. I do know of many others who have run into issues with GM not offering a…

The most popular trailer wheel bolt pattern is the 5 on 4-1/2 inch bolt pattern and as far as we are aware the bolt pattern you mentioned is not used on trailers at all. So my bet is you probably have the 5 on 4-1/2 inch. I attached a help article…

Dexter Flange Wheel Nut #95188 is sold individually so you will need to order the specific quantity you want when placing your order. The nut has an inside diameter of 5/8-inches,18 threads per inch and it is shown in the linked photo.